How to Deal with a Blocked Stormwater Drain on Your Commercial Property

Most of the time, nobody thinks about the stormwater system. Then a summer storm hits, the car park floods, water pools against the entry doors and the pits along the driveway start overflowing. That is usually the moment a blocked stormwater drain gets noticed.
For commercial, strata and government properties across Sydney, stormwater blockages can cause flooding, damage to buildings and stock, slip hazards and pollution of local waterways. The good news is that most of them are predictable and preventable.
This guide explains how stormwater drains work, how to spot and deal with a blockage, who is responsible for fixing it, and how PJC Plumbing helps property managers keep their stormwater systems flowing.
How Stormwater Drains Differ from Sewer Drains

Your property has two separate drainage systems. The sewer carries waste water from toilets, sinks and kitchens to Sydney Water's treatment plants. The stormwater drainage system carries rainwater from roofs, gutters, downpipes, car parks and paved areas to the council network, and from there to creeks, rivers, beaches and the harbour.
The key difference is that stormwater is not treated. Anything that washes into a stormwater pit, from leaves and litter to oil and chemicals, ends up in local waterways. That is why the two systems must never be cross-connected, and why the NSW EPA's message to businesses is that the drain is just for rain.
A typical commercial stormwater system includes gutters and box gutters, downpipes, grated surface pits, underground stormwater pipes and silt pits. Some sites also have on-site detention tanks or pump-out pits that hold or lift water before it discharges to the street.
Signs of a Blocked Stormwater Drain
Water pooling in car parks, courtyards or driveways long after the rain has stopped.
Pits overflowing during rain, or water bubbling up through grates.
Gutters overflowing even though they look clear, which often points to a blocked downpipe below.
Water entering buildings at doorways, roller doors or lower ground levels.
Damp walls, erosion or small sinkholes above underground pipe runs.
Stagnant water, odours or mosquitoes in pits between storms.
Silt, mulch or debris visible in pit baskets and grates.
Because a stormwater line only flows when it rains, a blocked stormwater drain can sit unnoticed for months. The first sign is often the heaviest storm of the season.
Common Causes of Stormwater Blockages
The causes differ from sewer blockages, which we cover in our guide to the top causes of blocked drains. Instead of grease and wipes, a blocked stormwater drain is usually caused by whatever washes off the site:
Leaves, twigs and garden debris from trees overhanging roofs and car parks.
Silt, sand and soil, particularly from landscaping, unsealed areas and nearby construction.
Mulch washing out of garden beds into surface pits.
Litter such as plastic, cans and packaging from public areas and loading docks.
Tree roots entering through cracked joints in older clay or concrete stormwater pipes.
Broken, sagging or undersized pipes that cannot carry the flow, or pipes laid with too little fall.
Damaged or covered grates that stop water entering the system at all.
Who Is Responsible for a Blocked Stormwater Drain?

Responsibility for a blocked stormwater drain depends on where the blockage is. As a general guide in Sydney:
Property owners look after the private stormwater system on their land, including gutters, downpipes, pits and pipes, up to the point where it discharges to council's system, usually a kerb outlet or a council pit. Some councils also hold owners responsible for private pipes that cross a footpath or other council land.
Councils maintain the public stormwater network, such as street pits, kerbs and pipes in roads and reserves.
Sydney Water manages some larger stormwater channels and trunk drains in parts of Sydney.
Strata schemes and leased buildings: the owners corporation generally looks after stormwater on common property, while a commercial lease sets out what the landlord and tenant each handle.
Rules vary between council areas, and drainage easements can complicate things, so check with your council if a blockage is near the boundary. If the problem is on your side, a licensed plumber is the right call.
How to Deal with a Blocked Stormwater Drain: Step by Step
Make the area safe. Keep people and vehicles away from flooded areas, open pits and lifted grates. Never climb into a stormwater pit, because pits are confined spaces.
Check what you can safely see. Clear leaves and litter from surface grates and pit baskets at ground level, and look at whether gutters, downpipes or pits are the source of the overflow.
Do not hose debris into the street. Washing silt and leaves into the kerb only moves the blockage to council's system and can breach pollution laws.
Do not use chemicals. Drain cleaners do nothing for silt and roots, and anything poured into a stormwater pit flows straight into waterways.
Call a licensed plumber if the stormwater drain is blocked and water is still not draining, the blockage is in an underground pipe, or the problem keeps returning.
Fix the cause, not just the symptom. Ask for a camera inspection so you know whether the line is damaged or undersized.
How Professionals Clear and Repair Stormwater Drains

A plumber's approach to a blocked stormwater drain usually combines stormwater drain cleaning, inspection and repair:
Jet blasting with high-pressure water to flush silt, roots and debris out of underground stormwater pipes.
Pit cleaning to remove sediment from silt pits, grated pits and pit baskets.
CCTV drain inspection to locate the blockage and check for cracks, collapses and root intrusion.
Pipe relining to seal cracked or root-damaged stormwater pipes from the inside, without digging up car parks or landscaping.
Upgrades or replacement where pipes are broken, undersized or laid with the wrong fall, designed to AS/NZS 3500.3, the Australian standard for stormwater drainage.
For a strata complex in Balmain, PJC Plumbing used CCTV inspections, flow testing and in-ground tracing to find broken pipework and non-compliant gradients, then replaced the system in stages while residents stayed in their homes. You can read the full Balmain stormwater replacement case study.
Preventing Stormwater Blockages Before Storm Season

Sydney's heaviest rain often arrives in short, intense summer storms, which gives a partly blocked system very little time to cope. A simple maintenance routine reduces the risk of a blocked stormwater drain:
Clean gutters, box gutters and downpipes regularly, and more often on sites with large trees.
Inspect and empty pits, pit baskets and silt pits, especially in late spring.
Keep mulch and soil below the level of surface pits, and fit pit baskets where debris is heavy.
Jet known problem lines on a schedule and camera-inspect older pipes every few years.
Service stormwater pumps and on-site detention systems to the manufacturer's or designer's schedule.
Ask grounds and cleaning staff to report pooling water, overflowing pits and damaged grates.
Adding stormwater to a preventative plumbing maintenance program means it gets checked on a schedule, not only after a flood. On larger sites, drainage upgrades can also improve how a property handles heavy rain, as in our Ollie Webb Reserve flood prevention project for the City of Parramatta.
Why Choose PJC Plumbing for Stormwater Drains

PJC Plumbing has delivered stormwater and drainage work for councils, schools, strata schemes and commercial properties across Sydney, including stormwater drainage installation for Sutherland Council. Our ISO-certified team is licensed and insured, and works with property managers, engineers and councils to deliver compliant work with minimal disruption.
24/7 response when a blocked stormwater drain floods your site, through our emergency plumbing service.
Commercial blocked drain services covering stormwater, sewer and grease trap lines.
Upfront pricing, with clear findings on what caused the problem and how to fix it.
Experience working on occupied buildings, public parks and school campuses.
Get Your Blocked Stormwater Drain Sorted Before the Next Storm
If water is pooling, pits are overflowing or you are not sure when your stormwater system was last checked, PJC Plumbing can inspect it, clear any blocked stormwater drain and recommend a long-term fix.
Call 02 8022 9000 or book a free onsite consult with our team.
Frequently Asked Questions
How do I unblock a stormwater drain myself?
You can safely clear leaves and litter from surface grates and empty pit baskets you can reach from ground level. Blockages inside underground pipes need a plumber with a jetter and a camera. Never enter a pit or lift heavy covers without the right equipment.
Who is responsible for blocked stormwater drains in Sydney?
Property owners are generally responsible for stormwater pipes and pits on their land up to the point where they connect to council's system. Councils look after the public network, and Sydney Water manages some larger channels. Check with your council if the blockage is near the boundary.
Can tree roots block stormwater pipes?
Yes. Roots are a common cause of a blocked stormwater drain on older sites. They find their way into cracked joints in older clay and concrete pipes, then trap leaves and silt. Jetting clears them for a time, while relining seals the joints so roots cannot get back in.
How often should commercial stormwater drains be cleaned?
It depends on the site. Properties with large trees, unsealed areas or nearby construction need more frequent attention to avoid a blocked stormwater drain. As a minimum, have pits, gutters and downpipes checked once a year, ideally before the summer storm season.
Is a blocked stormwater drain the same as a blocked sewer?
No. They are separate systems. A stormwater blockage causes flooding and pooling during rain, while a sewer blockage affects toilets, sinks and the overflow relief gully. They also have different causes and responsibilities.
Can stormwater be connected to the sewer?
No. Stormwater must not be connected to the wastewater system, because heavy rain would overload the sewer and cause overflows. A licensed plumber can check for incorrect connections on your property.
What if my stormwater overflows onto a neighbouring property?
Owners are generally expected to manage their stormwater so it does not affect other properties. If water from your site is reaching a neighbour, have the system inspected so blocked or damaged sections can be repaired.




